Cce TV Repair: Common Faults and Solutions.
Search: Cce
Results: 4836
Results: 4836
Cce Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| CCE | HPS 2118 B | Low power supply - led off | Zd802 18v was measuring 16v | Replace zener zd802 - 18v | Pardal-X |
| CCE | TV 2118USP | With black bar on the left side of the screen | Ceramic capacitor c234 | It was a show! | Deusdete |
| CCE | HPS1471 | Image blurred to the right with black line in the left corner | Put a resistance in sector r 414 of the same value in my case | eletronica publison natal rgn | |
| CCE | STILE24D | Without consumption 5 volts normal with consumption 5 volts pulsing | Diodo zener 18v. (d801) | Cleuso | |
| CCE | C420 | No sound, or blocking the sound and robot-like sound | Ec4 | Replace of the same | Airton Filgueira |
| CCE | HPS2001 | White screen | Fr 914 | J D M | |
| CCE | D4201 | Does not turn on, orange LED | Replace capacitor ec4 | Replace 470x16v | jcgiantomaso |
| CCE | HPS1471 34BI | The TV would turn on oscillating normally, but before the image appeared it would simply turn off and the LED would blink. | Loose flyback ferrite. | Put a shim on it or find a way to fix it, or if you prefer, replace the flyback. | Tiago C. Neves |
| CCE | LT29G | Lower LED current | Remove r3 and r6 and place r3 that you took in series with r8, and change r126 from 0 to 10k | With this the voltage dropped to 40v | NEI |
| CCE | TV-29USP | Does not turn on, LED is on | R401 18k, c402 | Marcelo | |
| CCE | LH42G | It has 5v standby but not 12 and 24v | Photo coupler p3 and ci ic3 | Replace both | Eletrônica JJ |
| CCE | LH42G | TV does not turn on, standby LED does not light up. | Poor contact on fats q15 and q16 on the power supply board. | Resolder the aforementioned fets. | Eletrônica Video Color |
| CCE | STILED 4201 | Without sound and with "popcorn" in the sound | Defective ec4 electrolytic 470uf by 16v | Replace without measuring ec4 | edmilsom pimentel |
| CCE | HPS-1471 | Dark image | Resistors 208 and 209 | Replacing the 2 47k resistors | Raimundo tec |
| CCE | STILE D40 | Without image, with sound. the menu appears. | Replace reg. u3, 3v3 leaving 3v2. | joaomvjr | |
| CCE | STILE D3201 MP320G | LED turns green but does not turn on lamps (backlight) tsound was no voltage of 12 and 24 volts | Diode d7 open: just change it and give the budget. It generates a voltage of 12 volts to power u5 | Replace diode d7 in4007 with a more powerful one. | ELETRONICA SALES.NATAL RN |
| CCE | STILE 3201 BRANCA | No audio | Q 12 removes | C.M eletronica | |
| CCE | TV 2918USP/AV | Does not turn on, LED is on. | C407 (3n3 ) c402 (331pf) r401 (18k) e q401 (mpsa42) | Replace c402 / c407 / r401 e q401 | MARCONES DE ARARIPINA-PE |
| CCE | 2918USP/AV | Does not turn on, LED blinks, and returns to standby. | Defective transistor q401 mpsa42 | Replace q401 mpsa42 | MARCONES DE ARARIPINA-PE |
| CCE | TV PH 42M | Just plug in a weak blue LED | Loosen the inverter board connector if the LED turns red, the defect is on the inverter board, in my case tsound was no shorted MOSFET | As I had another board and in a rush to save time I replaced the board, but this way it gives you a guide to know which board the defect is on. | Ariel Santos |