Cce LN24G TV Repair: Common Faults and Solutions.
Search: Cce LN24G
Results: 8
Results: 8
Cce LN24G Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| CCE | LN24GW | Nothing works | C.I. U12 - 9435 (actually a fet) Short on R208 | Eletrônica do Alemão | |
| CCE | LN24G | Does not turn on short at the entrance | CI 9435 Position U12 | UTI das tvs e microondas | |
| CCE | LN24G V236BJ1-LE1 | Turns on without image, with sound and backlight, responding to commands. | Resistance of 0.02 across several capacitors on the v-con board. I had to remove them one by one to check which one was shorted. | In my case the short was only on CD2. replace and jump for joy. | World TV |
| CCE | LN24GW | Does not tune channels | Defective varicap | BOSCO | |
| CCE | LN24G | The backlite doesn't light up | F6 on the 12volt line open | Replace the same | Multimarcas/Acarí |
| CCE | LN24G | Steady orange LED (not flashing) | Orange LED fixed, rewrite the nand, orange LED flashing, probably faulty U12 | HP ELETRONICA | |
| CCE | LN24GW | Does not turn on, green and red LEDs are on at the same time. | Regulator u15 was without 5v at the input | Swap d8 and d11 | msiqueira553 |
| CCE | LN24G | Turns on, says "please wait", and that's it. it turns off, turns on, "for..." appears and stays like that all the time. The impression you get is that the flash memory is bad. | Check the "power" switch, it may be leaking. | Replace the "power" key. | arock |