Gradiente NEXT 29L TV Repair: Common Faults and Solutions.
Search: Gradiente NEXT 29L
Results: 10
Results: 10
Gradiente NEXT 29L Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| GRADIENTE | NEXT 29L | Tv turns on the stan by but it doesn't start when you activate the sw" tok button it makes a tick turns off the led and it comes on again, but it doesn't turn on | Remove what 01 note..everything was ok | ELETRÔNICA IDEAL | |
| GRADIENTE | NEXT 29L | Blurry image looking like socket or lack of negative attention in the vertical. | After discarding the obvious I discovered that by moving the board it returned to normal. | After discarding the obvious, he solved all the SMD components of the vertical circuit and it was ok. the bad contact was in the smd | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| GRADIENTE | NEXT 29L | Reduced image on the sides | I tried to adjust it in service mode but the adjustment did not work. | 27k r316 on ew circuit, open. | luis carlos |
| GRADIENTE | NEXT 29L | Image with retrace | Ic904 (kinescope board) | AdrianChapadão | |
| GRADIENTE | NEXT 29L | Turns off when changing channels or when entering service mode | Interrupt the track that leaves pin 3 of the power supply transformer to diodes d803 and 802 and solder a double body ferrite coil and that's it. | ||
| GRADIENTE | NEXT 29L | Tv turns on the stan by but it doesn't start when you activate the sw" tok button it makes a tick turns off the led and it comes on again, but it doesn't turn on | Remove what 01 note..everything was ok | ELETRÔNICA IDEAL | |
| GRADIENTE | NEXT 29L | Blurry image looking like socket or lack of negative attention in the vertical. | After discarding the obvious I discovered that by moving the board it returned to normal. | After discarding the obvious, he solved all the SMD components of the vertical circuit and it was ok. the bad contact was in the smd | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| GRADIENTE | NEXT 29L | Reduced image on the sides | I tried to adjust it in service mode but the adjustment did not work. | 27k r316 on ew circuit, open. | luis carlos |
| GRADIENTE | NEXT 29L | Image with retrace | Ic904 (kinescope board) | AdrianChapadão | |
| GRADIENTE | NEXT 29L | Turns off when changing channels or when entering service mode | Interrupt the track that leaves pin 3 of the power supply transformer to diodes d803 and 802 and solder a double body ferrite coil and that's it. |