Search: Gradiente TF 2952
Results: 8

Gradiente TF 2952 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
GRADIENTETF 2952
This TV arrived with a strong tick, tick, tick as if the horizontal output transistor or some capacitor in this line was shorted. However, it was nothing like that. the problem was the shorted 406 diode.After replacing the diode, the device showed excessive width. The short in diode 406 also caused a short in the smd transistor q405 bc 858. After replacing the transistor q405, the width remained normal.JFR
GRADIENTETF 2952
When executing menu functions alone, the volume increases and does not decreaseFunction soft key, it gives the impression of being micro-nas or memory, to know and just turn off the terminal that connects the board with the function soft keys, if the TV stops executing functions alone, it is the keys that are bad, Tsound is no point in measuring, they have to be replaced, if the keys have any internal resistance, energy will pass through it and the computer will interpret it as a function.Replace all soft keysRicardo Alves
GRADIENTETF 2952
02 retractions at the top of the screen and 01 cm of image at the bottom. sound ok.Eprom 24c16. you can place a blank then adjust the geometryFERNANDO S
TV GRADIENTETF 2952
Turning off by itselfC805 :10/160 replace po 47/160vtsGood tip worked!!!!!!!!!!1monsores
GRADIENTETF 2952
This TV arrived with a strong tick, tick, tick as if the horizontal output transistor or some capacitor in this line was shorted. However, it was nothing like that. the problem was the shorted 406 diode.After replacing the diode, the device showed excessive width. The short in diode 406 also caused a short in the smd transistor q405 bc 858. After replacing the transistor q405, the width remained normal.JFR
GRADIENTETF 2952
When executing menu functions alone, the volume increases and does not decreaseFunction soft key, it gives the impression of being micro-nas or memory, to know and just turn off the terminal that connects the board with the function soft keys, if the TV stops executing functions alone, it is the keys that are bad, There is no point in measuring, they have to be replaced, if the keys have any internal resistance, energy will pass through it and the computer will interpret it as a function.Replace all soft keysRicardo Alves
GRADIENTETF 2952
02 retractions at the top of the screen and 01 cm of image at the bottom. sound ok.Eprom 24c16. you can place a blank then adjust the geometryFERNANDO S
TV GRADIENTETF 2952
Turning off by itselfC805 :10/160 replace po 47/160vtsGood tip worked!!!!!!!!!!1monsores