Jvc TV Repair: Common Faults and Solutions.
Search: Jvc
Results: 434
Results: 434
Jvc Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| JVC | 25SX1EK | Comes on in av mode - no sound when chan selected | Ic703 eeprom pt no at24c04255x1ek & re-initialise as per manual | ||
| JVC | 25S1EK MXII | Stby led changes red to gren but no line drive | Check q902 v if missing r903 ( 2k2 ) o/c | ||
| JVC | 25S1EK MXII | No vision - wont tune in | C119 47n if unit. on pin 2 ic 101 | ||
| JVC | 25S1 | No sync in off air & av mode | No sync pulses at ic201; ic103 -(mc4066bf. smd) on text board | ||
| JVC | 14ET1EK | Hotel mode? no chan store & "h" in top corner | Pull up res r605 27k for chip select pin was o/c | ||
| JVC | 14E1EK ONWA | Dead | Chopper tr 2sd1545 leaky | ||
| JVC | 1480EK | Stuck in st/by (timer light?) | 22µ sm cap in stn select module had leaked & broken track between pin 2 of the ic and l001 choke. | ||
| JVC | 1430R | Hum bar | Smoothing cap 100µ 400v | ||
| JVC | 7860 | Bright raster. | C104 ( 10uf , 200v ) dries up , tr204 ( bc327 will do ) | ||
| JVC | 1480 | Tuner drift | Check sm comps | ||
| JVC | 1480 | Proc module faulty | Caused by 3 legged ceramic filter | ||
| JVC | 1480 | Dead - when main micro sus | Check blue ceramic 3 legged filter | ||
| JVC | HR- J240 | Doesn't start | C971 = 2200uf 16volt | Sub c 971 = 2200 μF 16volt | |
| JVC | HR-S 9500E | Cassette gets stuck when exiting | Loose clutch lever |