Mitsubishi TC 1410 TV Repair: Common Faults and Solutions.
Search: Mitsubishi TC 1410
Results: 8
Results: 8
Mitsubishi TC 1410 Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI | TC 1410 | High horizontal voltage of 200 v | 1 k resistor open position 955 near the coupler | Joel som | |
| MITSUBISHI | TC 1410 | The red standby light turns on, pressing the power key turns off the LED and does nothing, it doesn't oscillate. | Open 6r8 3w resistor r571 and cap c567 in bad line pin 9 of the flyback | ||
| MITSUBISHI | TC 1410 | When turning on, the stand by LED stays on, the power key activates and the screen flashes continuously, the power supply oscillates so that it is not possible to read it. | Open 100r resistor 908 | Matões A.Técnica | |
| MITSUBISHI | TC 1410 | Doesn't start | R908 of 100r open | JD CARLINHOS | |
| MITSUBISHI | TC 1410 | Doesn't start. When you press the power key, the LED goes off (as if it were going to turn on). | Resistor r571 (14" 8r2, 20" 6r8 - 3w) aberto. | TecVídeo | |
| MITSUBISHI | TC 1410 | When turning on, the stand by LED stays on, the power key activates and the screen flashes continuously, the power supply oscillates so that it is not possible to read it. | Open 100r resistor 908 | Matões A.Técnica | |
| MITSUBISHI | TC 1410 | Doesn't start | R908 of 100r open | JD CARLINHOS | |
| MITSUBISHI | TC 1410 | Doesn't start. When you press the power key, the LED goes off (as if it were going to turn on). | Resistor r571 (14" 8r2, 20" 6r8 - 3w) aberto. | TecVídeo |