Mitsubishi TC 1418 TV Repair: Common Faults and Solutions.
Search: Mitsubishi TC 1418
Results: 14
Results: 14
Mitsubishi TC 1418 Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI | TC 1418 | Stop r571 open. | Cond.c567 of 4.7 mf x250v change the resist.r571 and the capacitor.they are together close to f. b. | kin | |
| TV MITSUBISHI | TC 1418PS | Perfect image in RF, but no color | Cold soldering | Resolder or jumper that does not ground | Eletrônica Nel |
| TV MITSUBISHI | TC 1418PS | This television, which according to the customer was connected to the dvd watching a film, during a storm the image on the television in av disappeared, in rf the channels are normal, when activating the av the blue screen appears, if you press menu you have the sound of the dvd nothing but the image | With the change of the ic 101-m52771 asp, the television started working again with av and the normal channels, with colors, but tsound is one but if I connect it to the dvd it stays normal all day long, if I change it to rf it also has the normal channels, if I go back to av the image stays in black and white and the colors only return after it cools down | Resolved by changing the ic-701e101 and eeprom. | BF.COLATNO |
| MITSUBISHI | TC 1418 PS | It doesn't turn on, it just stays on standby | Trafo 552 open | Replace it or try to recover it | Marcos Antonio Santofofo |
| MITSUBISHI | TC 1418PS | It doesn't turn on, it just stays on standby | R 571 and c567 causing heating of r571 | ||
| MITSUBISHI | TC 1418 | White screen with characters | Enter service mode and turn off blank mode | KELSON | |
| MITSUBISHI | TC 1418 | Just on standby, doesn't turn on. | Ic 251 faulty 9v voltage regulator, output voltage below normal, triggering protection pin 30 of ic701 (micro) x-ray | Replace ic 251 9v regulator | MAGAIVER |
| MITSUBISHI | TC 1418 | Stop r571 open. | Cond.c567 of 4.7 mf x250v change the resist.r571 and the capacitor.they are together close to f. b. | kin | |
| TV MITSUBISHI | TC 1418PS | Perfect image in RF, but no color | Cold soldering | Resolder or jumper that does not ground | Eletrônica Nel |
| TV MITSUBISHI | TC 1418PS | This television, which according to the customer was connected to the dvd watching a film, during a storm the image on the television in av disappeared, in rf the channels are normal, when activating the av the blue screen appears, if you press menu you have the sound of the dvd nothing but the image | With the change of the ic 101-m52771 asp, the television started working again with av and the normal channels, with colors, but there is one but if I connect it to the dvd it stays normal all day long, if I change it to rf it also has the normal channels, if I go back to av the image stays in black and white and the colors only return after it cools down | Resolved by changing the ic-701e101 and eeprom. | BF.COLATNO |
| MITSUBISHI | TC 1418 PS | It doesn't turn on, it just stays on standby | Trafo 552 open | Replace it or try to recover it | Marcos Antonio Santofofo |
| MITSUBISHI | TC 1418PS | It doesn't turn on, it just stays on standby | R 571 and c567 causing heating of r571 | ||
| MITSUBISHI | TC 1418 | White screen with characters | Enter service mode and turn off blank mode | KELSON | |
| MITSUBISHI | TC 1418 | Just on standby, doesn't turn on. | Ic 251 faulty 9v voltage regulator, output voltage below normal, triggering protection pin 30 of ic701 (micro) x-ray | Replace ic 251 9v regulator | MAGAIVER |