Mitsubishi TC2099 TV Repair: Common Faults and Solutions.
Search: Mitsubishi TC2099
Results: 28
Results: 28
Mitsubishi TC2099 Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI | TC2099 | Burning horizontal output transistor | Grounding track of the t551 driver transformer broken. | The track on the aluminum cooler terminal on the edge of the board was redone. tv ok. | Denys de Sene |
| MITSUBISHI | TC2099 | TV inoperative, stand-by LED blinking | C907 exhausted (22uf/100v) | Replace c907 (22μF/100v) | Denys de Sene |
| MITSUBISHI | TC2099 | Tips on how to trigger automatic tuning. | Menu/tuning/function/auto tune off/volume + | Wait for 5 seconds with the volume + button on the remote control pressed and the TV starts tuning by itself. | edsomvideo |
| MITSUBISHI | TC2099 | Locks functions | TV off, press channel + and - until it turns on | Function lock, turn it off | ELETRONICA MAURI JUNIOR |
| MITSUBISHI | TC2099 | Bands passing behind the image. | C705 and c703 of 1mf x 50 volts without capacity. | It was replaced and resolved. | Armando Eletronica EvoluSom, Olímpia |
| MITSUBISHI | TC2099 | Inoperative, LED blinking +b of the power supply varying. | C907 22uf/100v sold out. | edsomvideo | |
| MITSUBISHI | TC2099 | Image shifted to the left | Open horizontal phase adjustment trimpot (vr501) close to the seletronic. | alexsts | |
| MITSUBISHI | TC2099 | TV stuck in function lock | You must proceed as follows: with the TV turned off, press the (channel +) key, then press the (channel -) key, the television should turn on normally. however, it will still continue with its active function. To deactivate it, go to the menu and look for the lock function and deactivate it. | heliomar | |
| MITSUBISHI | TC2099 | TV stuck in function lock | 1) with the TV turned off, press the channel + button and then the channel - button. the TV will turn on; | heliomar | |
| MITSUBISHI | TC2099 | TV stuck in function lock | Unlocking mitsubishi mod tv. tc-2099 | heliomar | |
| MITSUBISHI | TC2099 | Timing | Replace cap. c208 1/50v | digitos | |
| MITSUBISHI | TC2099 | Does not come out of stand-by | Capacitors - c569-10/160 - c907-22/100 and c905-220/16 | Replace mentioned items | eletronicaapolo |
| MITSUBISHI | TC2099 | Led standy by piscando | Capacitor c907 | pc | |
| MITSUBISHI | TC2099 | With image without horiz synchronization. | Cap elet, c705 1/50v | haecio | |
| MITSUBISHI | TC2099 | Tips on how to trigger automatic tuning. | Menu/tuning/function/auto tune off/volume + | Wait for 5 seconds with the volume + button on the remote control pressed and the TV starts tuning by itself. | edsomvideo |
| MITSUBISHI | TC2099 | Locks functions | TV off, press channel + and - until it turns on | Function lock, turn it off | ELETRONICA MAURI JUNIOR |
| MITSUBISHI | TC2099 | Bands passing behind the image. | C705 and c703 of 1mf x 50 volts without capacity. | It was replaced and resolved. | Armando Eletronica EvoluSom, Olímpia |
| MITSUBISHI | TC2099 | Inoperative, LED blinking +b of the power supply varying. | C907 22uf/100v sold out. | edsomvideo | |
| MITSUBISHI | TC2099 | Image shifted to the left | Open horizontal phase adjustment trimpot (vr501) close to the seletronic. | alexsts | |
| MITSUBISHI | TC2099 | TV stuck in function lock | You must proceed as follows: with the TV turned off, press the (channel +) key, then press the (channel -) key, the television should turn on normally. however, it will still continue with its active function. To deactivate it, go to the menu and look for the lock function and deactivate it. | heliomar |