PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
TV PHILIPS | 29PT 6566 L04-AA | Reduces the frame by giving 3 colored lines at the top vertically and turning off after 5 minutes | The cause a r 3457 1r open | jose ferreiras | |
PHILIPS | 21PT1663/11 L7.2E | After a few minutes the image begins to slowly shift to the right. when it gets close to the center it goes into protection and goes to stby. | Deflector coupling capacitor h leaking. 220pf 2kv | Joaquim Monteiro | |
PHILIPS | 32PFL3403 | Won't turn on, fuse blown | Check leak in bd1, and its replacement. | BRUSKE | |
PHILIPS | 21PT5432 | Doesn't start | Photo coupler position (7515) change | CHARLES | |
PHILIPS | 20PT529 | Totally inoperative power supply | Nothing works, not even the power LED lights up | Photo coupler 7515 swap | lolo |
PHILIPS | 14PT3336/78 L03.6LCA | Works normally, vertical only opens at the bottom of the screen, appears with a white line in the center | Smd 2496 1n0 capacitor shorted | FUBUIA | |
PHILIPS | 21PT5433 | Turning off | Open smd 6445 diode | Replace diodo smd 6445 | SIDNEY VALENTINA |
PHILIPS - DVD PLAYER | DVP3040K | Standby off | 1n4004 rectifier diode and 500 milliampere fuse | The diodes and fuse were replaced and the DVD started working correctly again. | domingos.aladir |
PHILIPS | 29PT4641 L04L AA | Noisy and low sound at RF and AV output | Coil 5214 that is connected to pins 120,122,124 that provides 3.3 volts power | Coil 5214 that is connected to pins 120,122,124 that provides 3.3 volts power | Barack |
PHILIPS | 21PT5435/78 | No image, just characters appearing | Replace 3442 100k resistor - for 21" TV | Gelasio Altenhofen | |
PHILIPS | HTS DVD E RADIO HDMI | Doesn't turn on without more b + in primary and secondary | R937 open | Device came from another electronics well replaced, replace r 937 | luiztvsom |
TV-PHILIPS | 20GL1349 | Dark image and low screen voltage (+or-40 volts) | Rusty trc socket | Replace it | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT428A | Inoperative or very low power supply approximately 20 volts | Leakage in the power supply fet, leakage from pins 1 and 2 to 3, measure on a scale of x1, normal and gives a small resistance between pins 2 and 3 | Replace or fet | Ricardo Alves |
PHILIPS | DVP-3005 | Doesn't read, doesn't light the laser | Mpeg | After testing all the components without success, I connected pins 20 and 21 of the mpeg to a 1m resistor to gnd and the laser started to light up and read normally again. | devanir |
PHILIPS | 42PF7320 | Does not turn on. activates protection. | Amplifier. audio short. Note: if you have any speaker open, it also activates protection. | Replace. | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 14PT135A | Gave pink color. | The image appeared without green, only pink. | Replace the green circuit transistor (bf422). | Pedro_Manuel |
PHILIPS | 29PT5642/78 | Sem +b secondary | TV doesn't turn on | Replaced photo coupler unsuccessfully | ljsilva |
PHILIPS | 29PT4635 | Does not turn on bu4508dx in short | Q7461(bc337), q7463(bc327), c2455(47uf,25v), d6582(fuga) | Bu4508dx I put a bu2525dx it was perfect, it doesn't heat up! | Alextecnico |
PHILIPS | 16GL1330 | It works, there is an image but not for the vertical trimer, it keeps running | Vertical | paulo roberto | |
PHILIPS | 21PT5435 L03.1L | Turns on and then turns off, no filament lights up | Broken track at 2444 (470uf x 25v) | Do the welding | Elias2305 |