PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 29PT6456 LA | Vertical closed | Shorted smd 6457 diode | edtv | |
| PHILIPS | 20PT529A | Does not turn on, does not light up, the inoperative LED | Coupler | Replace the same one for a new one | eletroclaudio aguas belas |
| PHILIPS | 14PT3336 L03.6L | Turns on the image appears and turns off in 5 seconds | Open 10k resistor r3475 | eletroclaudio aguas belas | |
| PHILIPS | 21PT5433 L03.1 | Turns it on and before the image appears it turns off the LED and it won't turn on again, just unplug it. she returns and repeats the same procedure | Defective tube socket | Replace the same one for a new one | eletroclaudio aguas belas |
| PHILIPS | 20LG1049 GR1-R03 | Reduced image without synchronization | Crystal 3.58 plastic format | Crystal replace | GENIVALDO |
| PHILIPS | 29PT9467 | Turns on normally with sound, lights up filament, without screen voltage and without image | Leaky pipe socket | Bruske | |
| PHILIPS | 29PT552A L9-LLS | LED keeps oscillating, turns on, doesn't turn on | Vbat voltage too high | Changing the two capacitors, c2450 and c2551, 47/160v, the TV was awesome | ffeet |
| PHILIPS | 29PT458A/78 * | Works normally after 2 hours and turns off loudly with 3 vertical lines, after it turns off the first time it goes away. | I replaced the socket with someone else's information, and it was fine. | Your replace | wagner |
| PHILIPS | 20PT4331 L03.1L | Totally unfocused image showing 3 blurred colors (green, blue, red) implying that it's a socket | Q7463 bc546 short between collector and base | Replace the q7463 tv got a 10 | JOSÉ GUSMÃO |
| PHILIPS | 14PT316A/78R | Power supply does not work, oscillating | Chap. 2530 and 2540 at power supply | Replace both ok. | fabiusmax |
| PHILIPS | 14GL1316/78R | No image, no OSD, normal tube, normal filament just doesn't show up in the image. | In 7207 TDA4661 Ruim. | Replace ci 7207 tda4661 | PALAURO |
| PHILIPS | 28PT800A FL1.17 | Does not start. red display on. protection activated | See line transformer, diode 6536 (byw29f) and smds 7541, 7541, 7542 | Divercentro | |
| PHILIPS | 20PT228A LO1.2L. | Tv turning off | R.3417 . open. | geraldo eletr.c.grande | |
| PHILIPS | 21PT6446/78 | Vertical with closed top and three colored lines | Electrolytic capacitor 2464 and 2465 with low capacitance | Replace them | eletrônica BRITO |
| PHILIPS | 21PT8467 | Vertical fechado | 3445 open 7463 shorted | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILIPS | 20PT3331 | Totally inoperative | Saturate. Saida Horintal | After changing. horizontally, the TV turns off after 5 s. Then I just adjusted the screen and everything went back to normal | ROMILDO |
| PHILIPS | 29PT554A | Dark screen with retrace lines (normal sound), actuating the screen only increases the retrace. | R3340 pci do cinescopio | py3ig | |
| PHILIPS | 21PT9647 | Turns on normally but after three seconds returns to stand-by | 18v zener diode shorted (zd 303) | Replace it | eletrônica BRITO |
| PHILIPS | 21GL1369 | Normal image but all red, blue, or green. | Swap the three RGB output transistors. | Ok | This email address is being protected from spambots. You need JavaScript enabled to view it.(floripasc) |
| PHILIPS | 21PT5433 | Works for approximately 10 seconds and turns off | Fleibk desk tripod malfunction | ildefonso |