Search: Samsung
Results: 3758

Samsung Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
SAMSUNGZ68
DeadAudio o/p chip ic603 tda2616a s/c
SAMSUNGWS32W8VDEX
No g & flaring or r/b similarly affectedReplace r508, r503 or r513 82k.
SAMSUNGWI28W6VN
DeadReplace processor chip saa5553ps/m3/0069 probably caused by dry joint on choppertx
SAMSUNGWI28W6VD SCT53A
Reverts to st/by with strange noise from psu aft few minsDz808 7v5 zener pt no 0403-000562
SAMSUNGWI28W6VD S51A
Service mode enteringPress the following keys on the remote. standby>display>menu>mute>power on option bytes 1. zoom mode: wide/normal/zoom 2. audio mode: nicam stereo 3. one chip: tda8844 4. led option: normal 5. language: west eng/ger/dut/spa/ita/swe 6. system: ci 7. ats option: on 8. field pol: field pos having set the option bytes , press menu key and reset message should appear on the screen.
SAMSUNGWI28W6VD S51A
No sound, incorrect width & heightReplaced eeprom ic902 and reprogram
SAMSUNGWI28W6VD
To enter service mode - method 2Switch tv on. then on the remote control press standby, picture standard, help, sleep, and standby again.
SAMSUNGWI28W6VD
To enter service mode - method 2Switch tv on. then on the remote control press standby, picture standard, help, sleep, and standby again.
SAMSUNGWI28W6VD
To enter service mode - method 1Switch tv on. then on the remote control press standby, display, menu, mute, and standby again.
SAMSUNGWI28W6VD
No soundAfter entering the service menu to go into the sound menu and for this particular model set sound option to dolby then in system menu select ci for the uk, then press menu again and then press reset, this option stores the settings.
SAMSUNGW124W6VN
Brightness variesA1 pot on loptx - replacement loptx only cure
SAMSUNGVOYAGER 10
St/by only - no relay driveTuner/timer chip pt no 32-213-257sip
SAMSUNGVARIOUS
Entering service modesPress standby, display, menu, mute, standby
SAMSUNGVARIOUS
Entering service modesPress standby, display, menu, mute, standby press standby, picture standard, help, sleep, standby
SAMSUNGU88MT-1
Not cabbageNo 5v at pin 1&9 ic502 tda4661 del line chip. d503 5v zener leaky
SAMSUNGU88MT CI6230WN
Poor start up and/or no stby, led is offC806 100uf 25v (pin 9 tda4601)
SAMSUNGU88MT CI6230WN
Int. goes on/off to stbyC831 220uf 200v
SAMSUNGTVP5050IST SCV11F
Sigs int lost with line of instabilityTuner - can check it by swapping them over (2 identical ones incorporated in this set)
SAMSUNGTVP5050
Reverts to st/by aft pic displayed for a few secsLighthouse led not working - faulty
SAMSUNGTVP33601
Field foldover at topCheck r409 0r22, r303 10r ½w from 46v supply