Samsung UN46F5200 TV Repair: Common Faults and Solutions.
Search: Samsung UN46F5200
Results: 5
Results: 5
Samsung UN46F5200 Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SAMSUNG | UN46F5200 | CURRENT REDUCTION LEDS | remove smd resistors r9109 and r9210 | reginaldo moronte,eletronica junior caldas novas | |
SAMSUNG | UN46F5200 | Remote control doesn't work | Open track due to oxidation on the IR receiver/joystick board | The open trail turned on the go signal, to access it you have to remove the joystick. retrace the track with thin transformer wire. In my case, only this trail was open. | 2000 |
SAMSUNG | UN46F5200 | Sound failing, especially when the volume is medium to high. | Suspension of both speakers destroyed. | Just replacing the entire speaker or just the speaker. | 2000 |
SAMSUNG | UN46F5200 | Backlight flashing intermittently | Bad contact on the vr9530 potentiometer on the power supply board (it is on the part of the inverter close to the connector that goes to the backlight) | The potentiometer travels just under one turn, so first of all, mark the original position with a permanent marker, use contact cleaner spray and turn the potentiometer to remove the oxidation. return to the original position. | 2000 |
SAMSUNG | UN46F5200AG | Stand by LED lights up when you turn on the TV, the LED goes off and nothing else happens, it becomes inoperative | By disconnecting the main board from the power supply, the LED bars will start blinking and would have to light up at maximum brightness. | Rs 802 of 10r smd replaced to 155r in the power supply close to the cp 814s larger electrolytic of the power supply | REAL ELETRON CARVALHOS MG |