Semp TV Repair: Common Faults and Solutions.
Search: Semp
Results: 2824
Results: 2824
Semp Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SEMP TOSHIBA | TV2922 | Does not turn on, std-by lit, power supply normal | Check q402 and c416 | Diorge Coutinho | |
| SEMP TOSHIBA | TV2157MFS U10 | Normal league, blue screen | Video card diode d921 (1n4148) | delegado123 | |
| SEMP TOSHIBA | TVC205 | Vertical curled at the top | Raa0 | Pablo | |
| SEMP TOSHIBA | TS209CR | Vertical shakes and closes after hours of normal operation | C304 | Pablo | |
| SEMP TOSHIBA | TS209CR | Lack of vertical linearity | C303 | Pablo | |
| SEMP TOSHIBA | TS207VS | Jagged image | C408 | Pablo | |
| SEMP TOSHIBA | TS145VS | No image at top and bottom | 15 | Pablo | |
| SEMP TOSHIBA | TVC161 TVC164 TVC201 TVC204 | Q803 | Pablo | ||
| SEMP TOSHIBA | TS147 TS167 TS207VS/CR | +b com +9v | R812 open | Pablo | |
| SEMP TOSHIBA | TS147 TS167 TS207VS/CR | No high voltage | Q811 | Pablo | |
| SEMP TOSHIBA | TS201A | Lacks vertical linearity | C310 e c316 | Pablo | |
| SEMP TOSHIBA | TS201A | White screen with no image and no sound | C116 with leak | Pablo | |
| SEMP TOSHIBA | TC1470 | Green screen with white traces across the image | Replace ic501 | Pablo | |
| SEMP | TV 2090I U14 | Led standby ,+b 75 volts | C887 (direct swap) and c419 (direct swap) | cabessaonatal | |
| SEMP | TV2934(B)SL SK_91 SK91 | When turned on the vertical blows | Please help me solve this defect if you can!! I really appreciate it!! | LUZINAR OLIVEIRA | |
| SEMP | TV1480E U5 | No characters | Diodo zener d-302 | Replace (shorted) | LUCIANO |
| SEMP | LC2640W HL57 | No image | There are voltages, 24v for inverting. | The inverter board and ci's were resoldered. | joaomvjr |
| SEMP TOSHIBA | 2083 FAV U11 | Stretched, shaky image and horizontal lines. | Poor contact in several components: varicap, 5v regulator for the vertical circuit and mainly in r 408. | Resoldering in all mentioned and the main one was in r408(1k). | RONDYSOM |
| SEMP | TV 1030 | Vertical interminente | Bad contact | Resolder q 405 and its adjacent surroundings. | lo |
| SEMP | TV2015 U17 | Vertical beam. but the vertical line is not straight. It keeps making small curves | I changed the vertical outlet and nothing. | Replace deflector without measuring | Deusomar |