Grundig Repair Tips
Search: Grundig
Results 554
Results 554
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Grundig | CUC6851 | Line tearing with background crackle on sound | LOPTx was breaking down | ||
Grundig | CUC6851 | Display absent | Check fuse Si6010 on mains sw panel for o/c | ||
Grundig | CUC6460 | No sound - pic ok | SM transistor CT40061 (BC857B) faulty on main audio board | ||
Grundig | CUC6365 | Width excessive & poor e-w adj | D434 ZPY33 leaky | ||
Grundig | CUC6360 | No sound | MSP3410 chip | ||
Grundig | CUC6360 | E/W dist & lack of width | R508 5R6 fusible middle rear of main pcb | ||
Grundig | CUC6330 | Tripping | D569 BY228 leaky (next to LOPTr) | ||
Grundig | CUC6330 | Sync? Reduced line pulse | R176 hi res in flywheel timebase | ||
Grundig | CUC6330 | No pic - crt internal arcing - focus volts too high | LOPTx faulty (Konig FAT30329) | ||
Grundig | CUC6330 | No Luminance | There is no luma output from filter F120 SFB4595 (part number 8140-601-600) | ||
Grundig | CUC6330 | Negative looking pic - ok with scart I/p - in wrong standard | In menu set standard (s) to '2' & store with 'OK' key | ||
Grundig | CUC6330 | Hotel mode removal | Switch set off, and whilst holding the "i" button switch set on. On screen display gives option of hotel on/off, select off. | ||
Grundig | CUC6330 | greenish blank raster with fb lines - no oSD | no clock pulses on IC811 proc. - s/c on IR Rx o/p IC84001 on front panel | ||
Grundig | CUC6330 | Greenish blank raster with fb lines | No SDL SDA activity - s/c on o/p of IR Rx | ||
Grundig | CUC6330 | E-W faulty & narrow pic | R569 4.7R o/c (next to E-W chip TDA8145) | ||
Grundig | CUC6330 | E/Wfaulty with burning smell | Check R569 for o/c (6R8?), TDA8145 E/W chip - cause dry joint C567 | ||
Grundig | CUC6310 | Int sound mute | Mains sw momentary contacts leaky - replace switch | ||
Grundig | CUC6310 | E-W faulty | R569 4R7 o/c, L567 line lin coil overheating & faulty | ||
Grundig | CUC6310 | E/W faulty & R569 burning up | L567 (shorted turns) | ||
Grundig | CUC6310 | E/W corr fault | TDA8145 , R569 (4R7) and E/W choke (L567).(Rewound by hand) |