Grundig Repair Tips
Search: Grundig
Results 554
Results 554
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Grundig | CUC53 | Dead. | R527 o/c , due to faulty mica washer on BU508. | ||
Grundig | CUC53 | Dark murky picture - sound ok. | R722 o/c. | ||
Grundig | CUC53 | Blue picture & fly back lines & tripping. | T9576 ( BF421 ) s/c , R9573 , R9572 damaged. | ||
Grundig | CUC5200 | Blank white raster with no sound | The +B 12v supply low at 8v - T835 BC548 leaky | ||
Grundig | CUC52 | dead | chopper tr & TDA4600 blown - R646 to pin 4 of chip hi res | ||
Grundig | CUC52 | dead | HT but nothing else - D661 BY229 o/c | ||
Grundig | CUC50 | INT FIELD FAULTS | CHECK FIELD PRESETS | ||
Grundig | CUC46XX | Station ident on all the time. | Its a dealer option - sw off by pressing Tv then reveal. | ||
Grundig | CUC4635 | No pic aft tripler replacement | IC2250 MC144130 chip in NICAM Module (I²C data line low) | ||
Grundig | CUC4635 | No NICAM sound - mono sound ok | Check wfrm at pins 3,4 & 33 of CF70123 IC2550. If ok at pins 3 & 4 but pin 33 is low dis pin 15 AMU2484 chip. If signal appears at pin 33 then AMU chip is u/s. If not both chips could be faulty - replacement board cheaper. | ||
Grundig | CUC4620 | No sound or raster - loptx screams | TDA8410 line dr chip u/s | ||
Grundig | CUC4620 | Field collapse - partial | D7001 s/c, R525 0R33 o/c | ||
Grundig | CUC4620 | FIELD COLL | R525 0.33R D7001 SC | ||
Grundig | CUC4620 | Dead - tripler was arcing | replaced K536 tripler; T541; IC500 TDA8140; IC 2340 TDA2579; c541 220MF/40V; D546 BY228 | ||
Grundig | CUC4511 | Thin hum bar causing cogging | TDA8140 faulty or C527 | ||
Grundig | CUC44XX | Station ident on all the time. | Its a dealer option - sw off by pressing Tv then reveal. | ||
Grundig | CUC44R R | Frame cramp top & bottom with flyback lines at top | D421 ( 1N4935 ) leaky. | ||
Grundig | CUC44R R | Dead. | Dry joint on R516 by LOPT. | ||
Grundig | CUC44R R | Dead. | C633 ( 100uf 40v ) s/c. | ||
Grundig | CUC4411 | Col int | Replace sub carrier osc trimmer with a 15pFcap |