beko Repair Tips
Search: beko
Results 113
Results 113
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Beko | 16328 | dead | s/c lopt use HR7218 | ||
| Beko | 15225 | Pic shifted vertically | For up check R717, R722 1M; for down check R725 150k | ||
| Beko | 14212 | Tuning drifts | C458 100nF sm near tuner or C460 breaking down (in parallel with C457 - not shown on diag) 0µ47 63v | ||
| Beko | 12220 | Trips off at sw on - HT = 125v on bulb | D801 BY299 s/c - LOPTX could be the cause | ||
| Beko | 12220 | Top quarter of screen lit & blank - rest black | R717 1M o/c - connected to pin 5 TEA2029 also check R722 in series 1M | ||
| Beko | 12220 | Top ¼ of screen lit, rest blanked | R717 1M o/c also check R722 1M | ||
| Beko | 12220 | Int pic/sound - disappears with flashing on screen and noise thro speaker | Xtal Q701 in front of IC701 | ||
| Beko | 12220 | Col int | Dec panel plugs int | ||
| Beko | 12220 | Blank screen with buzzing & Thy overheats | R725 hi res | ||
| Beko | 10214 | PICTURE SHIFTED DOWN | R725 150k | ||
| Beko | 10214 | Goes off & on int | TA914 Off button on front panel - can substitute TA912 AV button if not used | ||
| Beko | 11,1 | E/W faulty & int blows LOPTr | C140 22nF across E/W mod diode | ||
| Beko | 11,1 | Dead | R101 4R7 safety res in line dr feed o/c due to line dr tfmr having shorted turns (pri winding should read 4R2) pt no BE051709 |