itt Repair Tips

Search: itt

Results 510

Make	Model Ch.	Symptom	Problem Solution
ITT	Monoprint A	Dead	LOPTx u/s - ok on dummy load
ITT	Mono B	WON'T COME ON FROM COLD AFTER 3-4 TRIES SET COMES	C707 2.2uF
ITT	Mono B	TRIPS WITH MOMENTARY DISPLAY	C715 1000mfd
ITT	Mono B	NO S/V - ALL SUPPLIES INC EHT PRESENT NO RESET PUL	C722 470mfd , 16v
ITT	Mono B	NO PICTURE OR SOUND WHEN SWITCHED ON SET HOWLS , S	C722 470uF 16v
ITT	Mini 2	Colour saturation pulsing when playing tapes	Also affected e-e to a lesser extent - TDA3561 decoder chip
ITT	Mini	St/by only	1A fuse Si651 o/c, T713 chopper tr BU508A s/c - C701 4µ7 o/c
ITT	LATE SLIM Slimline	WONT ALWAYS START , COMES ON WHEN WARM	CHECK 4.7mfd 400v POWER
ITT	Ideal color 3332GR	Won't start, going to stby.	Change polyester cap C709 connected between B-E of horizontal output Tr. Shorts hor. drive to ground
ITT	FX6332	DEAD , EHT STARTS TO RISE BUT STOPS AFTER SECS	OC44 ( 1000mfd 16v ) IN POWER SUPPLY
ITT	FX6320 CORE 2	Dead	D502 ( BY448 ) by LOPT
ITT	FX5532 Euromono	Lack of height from cold ( about 1 inch ) , clearing	6C10 ( 220UF , 35V ) in the flyback boost voltage generator network associated with the TDA8170 field output chip 6IC02.
ITT	FX4530	Blows LOPTr when sw on from st/by	C734 10µ 450v in psu & 4.3nF 1.6kv buffer cap in line scan - check HT = 105v (17")
ITT	FT110	Colour - phasing varing.	C818.
ITT	Euromono 2	Lack of height from cold	6C10 220µ 35v
ITT	EuroMono	No colour.	13IC04 ( Tvp02066 Em0302 ) Pt No.3779-12-24 )
ITT	EuroMono	Int picture floods red with flyback lines.	IC1002 ( TEA5101A ) on CRT base.
ITT	EuroMono	Blank raster with flyback lines.	No 185v to CRT base , 5R56 ( 4.7R saftet ) o/c.
ITT	Euro Stereo2	S2000AF line o/p tr int goes s/c; line dr tr goes o/c	line driver tfmr
ITT	Euro Mono 2	dead apart from faint squeak	5T10 lop tr S2000A leaky; 5C38 10nf - 33nf dry joint (depends on model)