sanyo Repair Tips
Search: sanyo
Results 351
Results 351
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Sanyo | CTP7132 | Field collapse | C445 ( 2 , 200uF ) | ||
Sanyo | CTP7131 | DEAD BU208 SC . CHECK HT , IF HIGHER THAN 145v | C314 220uF 25v | ||
Sanyo | CTP6144 | Tripping - power supply | T391 ( part no PT0144 ) high resistance or o/c winding. | ||
Sanyo | CTP6144 | TOO BRIGHT | R478 OC | ||
Sanyo | CTP6144 | St/by only - no line drive | IC101 TDA4505 | ||
Sanyo | CTP6144 | Set going off. | Drys on pins of chopper transformer T301. | ||
Sanyo | CTP6144 | No col | IC TDA3565 | ||
Sanyo | CTP6144 | Lack of height | C435 2200µ 25v | ||
Sanyo | CTP6144 | Int red pic | dry joints crt base | ||
Sanyo | CTP6144 | Int dead | Dry joints T301 | ||
Sanyo | CTP6144 | Going off - display flashing - east west. | Dry joints on chopper transformer T301. | ||
Sanyo | CTP6144 | Field collapse | C435 2200µ 25v; R113 820k o/c | ||
Sanyo | CTP6144 | Dist pic & sound when cold | IC361 - 12v reg | ||
Sanyo | CTP6144 | Dead | T391 o/c | ||
Sanyo | CTP6143/4 | Thin horizontal bars on ch above 41. | Add 0.47uf , 50v across C123. | ||
Sanyo | CTP6143 | Shutdown - after about 10 mins - intermittent | Focus spark gap arcing to link J105. | ||
Sanyo | CTP6133 | Jumps/bounces and at sw on & line at top | C303 1µ stopped bouncing but line could be scan coils? | ||
Sanyo | CTP6133 | Changes channel by itself , may be a slight hum ba | Mains capacitor | ||
Sanyo | CTP6132 80P | Frame foldover at top. | C440 ( 4.7uf ) also change C447 ( 10uf ) | ||
Sanyo | CTP6132 | Dead | F301 800mA o/c; Q304 chopper tr s/c;C308 100µ was the cause |