Search: 20PT3336/78
Results: 34

20PT3336/78 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS 20PT3336/78
Not zero secondaryAfter checking the secondary step including the circuit that makes up the feedback of the coupling photo I found nothing replaced and tsound I died a 123J x 100V polyester capacitor between pin 1 and 4 of the photo coupler and tsound TV went to work normallyAnderson Eletrônica A&M
PHILIPS20PT3336/78
Breaks and doesn't turn on. power supply capacitor takes time to dischargeChapter 2564 of 47/160FÁBIO
PHILIPS20PT3336/78
TV with very low sound, even though it is on 100.Smd diode 6908 (near the audio output)Remove from circuit without measuring (edfesom;)Edfesom
PHILIPS20PT3336/78
When energized, the device simply gave a quick pulse to the power supply's secondary and turned off, keeping the primary capacitor (2503) with a residual charge.Transistor (7540) smd, leaky.Replace, (7540) (abs edfesom;)EDFESOM
PHILIPS 20PT3336/78
Shorted flybackFlybackChanging the flyback jf0501-19865 replacing jf0501-19272 and jf0501-19255 I could put it on and run for the hug!Sinai Santos
PHILIPS20PT3336/78
Turns on and off in secondsCold solder on the smd resistors next to the flipbackResolder all SMD close to the flyback.MARCONES DE ARARIPINA-PE
PHILIPS 20PT3336/78
Vertical closed at the top of the screen with white and colored linesDiode d6460 smd replace without measuring and replace with 1n4148ReplaceEletrônica Mauro Mascarenha - Parazinho Ceara - Tel : (88)981422821
PHILIPS20PT3336/78
Turns on with the vertical closed, and turns off, and sometimes tsound is a flash on the screen and turns offReplace r3491 47k d6001, 33v zener diode, both next to the varicapDJ PITUKA
PHILIPS20PT3336/78
It turns on and off, tsound are times when it turns on, holds it for a second and turns offReplace 6001 zener diode next to the varicap, 33vDJ PITUKA
PHILIPS20PT3336/78
No colorAfter checking some options, I decided to change the memory. the color returned.Replace memory 24c16Romildo Behrend Schwartz
PHILIPS20PT3336/78
When turned on, the +b goes up and then drops to 0v and the TV doesn't work. the power supply input capacitor is charged.Damaged photocoupler. just change it.Francisco Oliveira
PHILIPS20PT3336/78
Vertical; when turned on, a colored rgb band appears at the top of the screen, the screen lights up with a black band at the top and turns off.Polyester capacitor 2460=104 250v next flyback it changes and lowers 22v supplyReplace for newbeto2828
PHILIPS20PT3336/78
After about 5 minutes on, reduce the width on both sides.Capacitor c2408 (apparently good) 560n defectiveCarlos Maia
PHILIPS20PT3336/78
TV turns on normally when it turns off it doesn't want to turn on againStand by transistor (7541) defectiveReplace the same for another.adriano SB
PHILIPS20PT3336/78
TV with image closed at the topCapacitor 2465 secoReplace the same one for a new oneadriano SB
PHILIPS20PT3336/78
Tv inoperativeR 3355 proximo ao flay
TV PHILIPS20PT3336/78
Tunes wrong.I changed the 24c16wp eprom and the TV returned to normal tuning the channels with good qualityBF.COLATINO
PHILIPS20PT3336/78
To the TV and it keeps oscillating small beats on the flay backTransistor horizontal bul312fpBe replaced by but11axmarcondes, OHM eletronica Jaicos-PI
PHILIPS20PT3336/78
Does not work, the bul312 has a short circuitI changed the bulb 312 and it was fine..henrique
PHILIPS20PT3336/78
L03.6L
Vertical closed on offR.3448CompletedE. MATOS