40L2500 TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: 40L2500
Results: 7

40L2500 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
TOSHIBA40L2500
League appears the logo \\\ "toshiba \\\" and erases the backlightCid N701 LED Drive comes into protectionPlace a 10kH SMD resistor on top of C718 capacitor and remove R764 to reduce the current in the LEDLOOPTEL
TOSHIBA40L2500
League appears the logo \\\ "toshiba \\\" and erases the backlightCid N701 LED Drive comes into protectionPlace a 10kH SMD resistor on top of C718 capacitor and remove R764 to reduce the current in the LEDLOOPTEL
TOSHIBA40L2500
Alloy, the logo appears, shuts down.Check CI N804 3.3V regulator. In Sty is 3.0 volt. When it calls it falls to 2.9V.replace tsound n804.arock
TOSHIBA40L2500
When plugging in, the standby LED flashes once and turns off, the TV does not turn onN807 defective, pwm is going out but takes a few milliseconds to workReplace n807 - ci fr9889 (5v_stb), then the TV works againMalinkiman
TOSHIBA40L2500
The standby LED does not light up (does not work)Swollen capacitors. and n806.Replace capacitors and ci rt9889 (1v15 core)BRITO
SEMP40L2500
The red LED comes out but does not turn on, 5v oscillating, replace the bloated capacitor and the n807If when you press power the 5v on the n807 drops and keeps oscillating, replace the n807Rodrigo cofferiRodrigo cofferi
TOSHIBA40L2500
Bus LEDs flash but do not light up, new or used buses.Faulty LED driver circuit or dim control.Next to the oz9902, add a 10k parallel smd resistor on top of the capacitor (c718 smd), deactivating protection.RNSPTEC