47PFL3007D/78 TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: 47PFL3007D/78
Results: 5

47PFL3007D/78 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS47PFL3007D/78
5V normal, sem 24V e 12VC703 shortedSMD electrolytic 220uF/16V C703 on the main PCB below the power supply connectorEderlin
PHILIPS47PFL3007D/78
5V normal, sem 24V e 12VC703 shortedSMD electrolytic 220uF/16V C703 on the main PCB below the power supply connectorEderlin
PHILIPS 47PFL3007D/78
After a few minutes on, it makes a hissing sound, stripes on the screen, turns off, turns on with no imageU701, 3.3v regulator, change!Rodrigo cofferi
PHILIPS 47PFL3007D/78
STPM9.1L LA		It has a standby power supply, but when it turns on tsound is no 12 and 24 volt power supplyIc9101 explodedReplace; ic9101 ld7523gs, r9101 0.43, q9101 p10nk70, d9106, r9133 100, r9143 220, r9145 470, r9331 2r4,Jackson
PHILIPS47PFL3007D/78
Turn on the voltages at the power supply are normal, but tsound is no audio and the screen does not light up.Defect on the main board 715g5172-m01-001-004n, I reflowed the chip, it worked but then it stopped working.I replaced the board with one from the 42" TV with end k, it worked fine, good luck.Eronaldo(erontec)