Search: B7
Results: 46

B7 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
CENTURYB7
Device without picture with red LED onCold Solder Oscillator CrystalSolve the sameDylls-NET
TAICONTAICON B75
Original eeprom data taicon b75 motherboardOriginal eeprom data taicon b75 motherboarddados da eproomneupsx4
HISENSEH43B7100 RSAG7.820.8752/ROH
Standby LED flashes but the TV does not start and goes to standbyWhen I press the power button it starts blinking normally and then gives 2 quick blinks and goes back to standby.Defective backlight replace the complete busmario1970
INTELBRáSXNB720VA
Does not hold charge, falls and keeps beeping and turns off powerResistor 100r position r1Ademar
SAMSUNGUN55B7000
Stand-by LED flashing, but works normallyIt was solved by changing the two sensor boards (touch and remote)
LG47LB7DF
Dark screen, no image, lamps do not light.Check f700, open case possible q 706 and q707 shorted, usually cold solder causes them to burnReplace f700, q706, q707 and check possible annealed welds.Assolini BR
LG47LB7DF
Does not turn on, pfc circuit does not bend 400v. Vcc supply of cis u101 and u600 is low, causing the 400v not to doubleShorted components close to u501.Replace of components: zd500 zenner 15v, smd transistor q501 "I took it from scrap from a similar PCI", cracked c509 smd. I didn't find the schematic for this power supply.rafaelmoraes99
LG42LB7DF
Does not tune dtv channelsRipple in foodC817 replaceMarcos infotron-ltda
LG47LB7DF
Does not turn on nor does the LED light upPrimary power supply ok! the problem was the shorted pwm u502(ice3b1565j). r508(2r2) open and c202 and 206(2200uf/16v), stewed!.Luir
LG 42LB7DF
Sometimes it turns on, often it doesn't, the LED blinks, activates the inverter but tsound is no imageC401 reset circuit openReplace c401 10μF/16 vRoney Nogueira
LG42LB7DF
Sometimes it turns on but the image stays darkPower transistor 07n60c3 location q706 check q707 tooSwapping for a 12n50 power mosfet, solved the problemCELSOKAYRAN
LG42LB7DF-SB
LJ-81A
Takes time to callSecondary power supply with puffed capsReplace inflated caps on the secondary, c202, c217, c218, c226, c210 and c206, all 105 degreesRomolo Filho
SAMSUNGCCB7571
Monitor
No high voltageC449 - 10µf / 35vBilico
AOCCMLB747
Monitor
Displacement h when cold.C121 ? 10uf/250v. c12? 47uf/25v. c74? 1uf/250v. c62? 47uf/16v. look for cold welds.Bilico
AOCCMLB746
Monitor
Video flashes in the red cannon.Look for cold sodas. c706, c709 and c711? 1uf/160v.Bilico
LG47LB7DF
It takes a while to turn on, the LED just keeps blinkingC from power supply c202,217,210,221,200Bruske
SONYFH-B7CD
It doesn't close the drawer (it opens and then doesn't close) and it also doesn't read the CDCheck the limit switch on the optical unit, it is usually bent.Straighten the keyjohnny busnadiego
SONYFH-B7CD
Weak or unlit displayReview power supply -24v or diode d 910 = 24v shortedramiresrc
GOLDSTARCP14B70
TV does not turn on fluctuations in power supply and low voltageC 828 22/50v located at the power supplyELETRONICA ROCHA
LG700S -CB777G-NE
Nothing happens (has normal supply voltages)C954 disabledReplace the same with another (1000μF 10v)cardosojp