CFS45 Repair Tips
Search: CFS45
Results 6
Results 6
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Sony | CFS45 | REPLACEMENT PART IS SMALLER | Replaced tape transport with X-3570-050-1. Found motor switchnot being activated due to arm on brake lever being too short to reachswitch. Transport P/N X-3570-050-4 has correct length arm. | ||
| Sony | CFS45 | PROPER SCREWS NEEDED | Since the latest (metal type) carrying handle side pieces havebecome available, I have had difficulty finding a usable screw type whichthreads properly into the also new threaded holes in these parts. | ||
| Sony | CFS45 | ERROR IN SERVICE MANUAL | The IPB on page 37 shows the capstan belt as a take-up belt.Also T/R S/B 66 gives a new P/N for the belt. -HQ COMMENTS: We are issuing a S/B and T/N. | ||
| Sony | CFS45 | DEFECTIVE SIDE PLATES | Plastic handle side plates on this model break. Handle sideplates may not be strong enough to carry weight of this model under allstress conditions. | ||
| Sony | CFS45 | PCB MOUNTING SCREW BREAKS FOIL TRACE | Circuit board mounting screw is tightened too much. Cracksbreak B+ path to function switch. | ||
| Sony | CFS45 | BELT COMES OFF | Tape would not move in any direction. Found belt off motorpulley. |