DAEWOO GB14F7T1 Repair Tips
Search: GB14F7T1 DAEWOO
Results 6
Results 6
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Daewoo | Video Combi Model: GB14F7T1 | Smoke came out of vents, then shut down | Small pin hole in line output transformer type FSA36012M | ||
Daewoo | GB14F7T1 CP420 | St/by only | R804 47k start up res | ||
Daewoo | GB14F7T1 | Won't sw on with tape stuck - st/by only | No volts at 6v reg IC1806 - P803 plug/skt has 8v in but no 8v o/p due to dry joint on/off sw | ||
Daewoo | GB14F7T1 | Sound disappears int | (IC) I501 a TDA8374A mounted on the VCR pcb. | ||
Daewoo | GB14F7T1 | Dead - psu ok but no lop | hairline crack by LOPTr coll tp LOPTx | ||
Daewoo | CP420 GB14F7T1 | Int reverts to st/by | RLY2 relay was operating when fault occurred - IC I807 (TOP210-PF1) the standby switch mode IC in the power supply |