Search: KDL-42W655A
Results: 3

KDL-42W655A Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
SONYKDL-42W655A
Turn on and enter protection, turning off and flashing 6x red LED. First to do is check the LED bus. In my case all LEDs were ok.Unique way of making it no protection was putting a 1mega resistor between Pins 3 and 37 of CI BD9422, monitoring the voltage in pin 3 needs to have around 1.5V so as not to protectZW ELETRONICA
SONYKDL-42W655A
TV turns on and then turns off and stand-by flashes 6xLED problemChanging the LEDsINFONAITTS
SONYKDL-42W655A
Standby LED flashing red 5 timesOxidation on the lvds cable contactsCleaning was carried out on the lvds cable contacts and board connectors. defect resolved. In many cases, only replacing the lvds cable can remedy the defect.Fabricio