KDL-46EX605 TV Repair: Common Faults and Solutions.
Search: KDL-46EX605
Results: 6
Results: 6
KDL-46EX605 Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SONY | KDL-46EX605 | Threatens to light the backlight and then LED flashes 6x. | power supply that feeds backlight with low voltage. | PS6800 fuse open. It is at the bottom near the LED connectors. | Persio (TVCompany) |
| SONY | KDL-46EX605 | When turning on the LED, it lights up green and the faint Sony logo appears and turns off and the LED turns red and flashes 6 times | Open fusistor on the power supply pci on the bottom side it is in the upper right corner its value was not visible but a 0.5Ω one works well | Replace | Ferraz |
| SONY | KDL-46EX605 | When turned on LED go green, Sony logo appears smooth and turned off, LED turns red and flashes 6 times. | Open smd fusistor on the power supply pci I put a 0.5Ω one and it worked great it is in the top right corner of the power supply board | Ferraz | |
| SONY | KDL-46EX605 | The logo appears, the logo sound appears, and then it turns off. and so on without stopping. | Missing 1.2v st1s06pur *ic1004, back varicap, side of f1003. | Check f1003. It would be good to replace IC1004 or jump 1V from another regulator on the board. | Joaomvjr |
| SONY | KDL-32EX605 KDL-40EX605 KDL-46EX605 APS-272 1-881-774-13 | Doesn't start. It has 3.3v but does not activate stand-by. | Diode d6303 next to relay ry6001 with leak or short | I replaced the diode, I put the un4007 in its place | Eletronica M |
| SONY | KDL-46EX605 | When plugging into the socket, the standby LED flashes 3 times, when activating the PW, the green LED lights up and then the red LED flashes again, giving 7 beeps. | Circuit inverts 3v3 and 1v1, tsound was no voltage, it is next to the flet cable that goes to t-com | Check if 12v is coming. my fusistor case open. | Naldo Lima |