Search: LE32H1461
Results: 10

LE32H1461 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
AOCLE32H1461
It doesn't start anything or standby1 of the 4 diodes that are in parallel is on the run, medil one by one and find the defective (can be any of them)I replaced the first diode, can be the D9012 or any of them (between 4)Guedes Electronic
AOC LE32H1461
TV turns on normally, within minutes it becomes blank and has a curtain effect12v power supply Board, weak giving 10.2vCorrecting the power supply for 12v TV worked normally, without turning off the screenBeto eletrĂ´nica box 4
AOCLE32H1461
Standby LED does not light upDamaged power supplyReplace of ci u9102 (pf6003as) and opto u9101 (pc817)Paschoal
AOCLE32H1461
LE32
It doesn't turn on, it just stays on, the red LED is on, is the power supply voltage normal?Some LEDs are burnt or shorted, just change them and it will be back to normal.Enoque Dantas
AOCLE32H1461
Does not turn on the LEDs, does not flash the LED bar, has a power and sound LED signalTest the 3v, 1v, 12v and GND voltages of the IC of the PF 7708BS power supply, voltages accordingly, test LED bars.The LED bars short out, if you insist on switching on, the controller driver IC burns out (controls the negative of the LEDs), replace the IC and the entire bars, do not replace the LEDs.Cristian
PHILIPSLE32H1461
Stop does not turn on standbyD9101 shortedcarloseletronica
AOCLE32H1461
It doesn't turn on, if you loosen the lvds cable that powers the screen, the TV turns on and has audio!Change capacitor 227 or 228 on the screen plate!RODRIGO VIPO
AOCLE32H1461
Doesn't startShorted transistor sm1a23nPlace 4n70 no placeEletrĂ´nica Mauri Junior
AOCLE32H1461
Doesn't startFet transistor in secondary short to the power supplyReplace and put a 4n60 in its placeeletronica mauri junior
AOCLE32H1461
Doesn't startDiode d9112 just change it and run to the hugtec center