PH29E63D TV Repair: Common Faults and Solutions.
Search: PH29E63D
Results: 6
Results: 6
PH29E63D Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PH29E63D | I am sound. | In my case, it was software update. | Vilian Costa | |
| PHILCO | PH29E63D | Plug it into the socket and it goes straight from the red LED to green and doesn't do anything else | Regulator u8 1117 cdefective can be changed even if it gives 1.5v and it turns back on | Replace u8 1117 1.5v regulator and it works even if it gives 1.5v replace | Beto2828 |
| PHILCO | PH29E63D | Without with / losing audio | Capacitor | Capacitor next to q22 just above the ci sound output 10μF/16v | Rafael Nunes |
| PHILCO | PH29E63D | Turning off sometimes squeaking | Cold welding in the u50 power supply region | Good thermal blower solves it good luck | Jhone eletronica |
| PHILCO | TV PH29E63D LED | No audio | Ca 24 2.2uf | Techmix | |
| PHILCO | PH29E63D PE1 | The red LED turns on, then turns green and doesn't go away | Check signal board regulators u8 and u6 | Swap u8 and u6 | eletronilo |