STRV35 Repair Tips




Search: STRV35
Results 3
MakeModel Ch.SymptomProblem SolutionSolutionBy:
SonySTRV35
SIGNAL CLIPPING DUE TO INCORRECT PART SUBSTITUTE Q-605 and Q-655 seems to have an incorrect substitute. Theoriginal part was 8-729-601-42 (2SC1914A) which crossed to a 8-729-800-32(2SC2362K). The substituted part would overdrive the signal causingclipping and the output to distort.
SonySTRV35
OUTPUTS OPEN UNDER LOAD The output transistors in these receivers were intermittentlyopening under load. All these were used with 4 ohm speakers.Re: JR0803 STR-V35 listed did not have A979 failure.
SonySTRV35
DEFECTIVE OUTPUTS The NPN output transistor opened on one channel of each ofthese receivers. No other problems found.