Search: TC-40D400B
Results: 6

TC-40D400B Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICTC-40D400B
TV did not give picture, LED turned on and skirt soundCustomer reported that it was out of nowsoundDone a cleaning with isopropyl alcohol in all flex and made the replace of a capacitor on the screen bar and next to the same as the resistance replace that should have the value on both sides and only one side of it was giving valueRHUAN RAMA
PANASONICTC-40D400B
picturelessSMD CD32 Capacitor in the shortALEXANDRE
PANASONICTC-40D400B
ON AND OFF (RED LED FLASHES)BACKLIGHT MOSFETS GETTING VERY HOT, ONE OF THE BARS WAS AT 60V, THE OTHERS AT 48V. THEY SHOULD BE 48V. replace THE LED BARS RETURNED TO 48V AT THE OUTPUT WHICH WAS 60V AND STOPPED THE MOSFETS TO BE WARNED.REPLACING THE LED BARSLEO DA MEGA
PANASONIC TC-40D400B
The LEDs turn on but no imageLeaky capacitor cd33 on the vecom board (this was in my case)ELETRÔNICA DVN
PANASONIC TC-40D400B
It turns on and off, it turns on whenever it wants or after a while it turns off on its own.Oxidation on the function and command keyboard.Replace the keyboard for a new one or all the touch keys for new ones. Note: TV won't turn on without the keyboard!Maike Sorriso-MT
PANASONIC TC-40D400B
DeadCapacitor smdRemove an SMD capacitor from the video card that is very close to the power connector that comes from the power supply so the video card is on the underside of the card very close to an SMD fuse, just remove it and turn on the TV and run for hug.Sinailson furtado