TV Repair: Common Faults and Solutions.
Search:
Results: 87413
Results: 87413
Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
INSIGNIA | NS-PDP32-09 NS-PDP32-09 | It doesn't turn on or, when it does, there is no image, | Capacitors C233, C234, C204, C205 and C241. | Replace them all even if, when tested, they seem OK | AdamRep |
MAGMEET | MLT198L | PWM Standby Failure | IC2 failure (62641, 62639) | AdamRep | |
INVERTER | HIU-812-M HIU-812-S | Inverter failure | Check Inverter driver IC and the 4 FET transistors | Replace all even if testing original seems OK | AdamRep |
INVERTER | HIU-811 HIU-812 HIU-813 | Inverter failure | Check Inverter driver IC and the 4 FET transistors | Replace all even if testing original seems OK | AdamRep |
HISENSE | LHD32D37US | Front red LED on, however, the TV does not respond to the command | Faulty UF1 EEPROM. | Attention, they may have different eeproms depending on the model. Serial 32J1427 or 32J1415 | AdamRep |
SANYO | DP50749 P50749-01 EAY58316301 EAY58316301 | When turning on you hear a click and it turns off | Check and replace F801, Q801, Q802, IC801 | AdamRep | |
LG | 50PQ20-UA 50PQ30-UA EAY58316301 PSPU-J806A EAY58316301 | When turning on you hear a click and it turns off | Check and replace F801, Q801, Q802, IC801 | AdamRep | |
SAMSUNG | PL42C71HDPX PL42C91HPX PL42Q91HDPX BN44-00161A BN44-00161A | Does not turn on or clicks when turned on | SMD resistors RS867, RS879, RS878, RS862, RS863 e RS868; Diodos DS801 DS802; Transistors QS801 e QS802 | Repair diagram | AdamRep |
SAMSUNG | HPT4234X HPT4254 HPT4254X HPT4264X BN44-00161A BN44-00161A | Does not turn on or clicks when turned on | SMD resistors RS867, RS879, RS878, RS862, RS863 e RS868; Diodos DS801 DS802; Transistors QS801 e QS802 | Repair diagram | AdamRep |
ARION | AD-LC42F | power supply failure | Capacitores C63, C64, C66, C71,C72, C73, C74, C75, C76, C77 | Check and replace. | AdamRep |
APEX | LD4088 IP46001 IP46001 | No image, no backlight. | IP46001 Power Supply Failure | Check and replace 4 capacitors (39pF/6Kv) on the V420H1-DL15 board | AdamRep |
PHILIPS | 42PFL5422 715T2432-3 715T2432-3 | Does not turn on or turn off intermittently. | Power supply failure | Check replace C951, C952, C953 | Edson SP |
SAMSUNG | UN55NU6900FXZA UN55NU6950FXZA BN96-49639A BN96-49482A BN96-46947A | Power supply failure | Power supply failure. Check FP801S, CP810, CP813, QP801CS, ICP801 and RP813. | Replace all | Paulão |
SAMSUNG | BN96-49639A BN96-49482A BN96-46947A | Power supply failure | Power supply failure. Check FP801S, CP810, CP813, QP801CS, ICP801 and RP813. | Replace all | Paulão |
SAMSUNG | QN75Q60RAFXZA BN44-00874E BN44-00874E | Dead | BN94-14119C Power supply failure. Check FP801S, CP809, CP810, QP801CS, QP802CS, CP811 and CP812. | Replace all | Paulão |
SAMSUNG | QN75Q60RAFXZA BN44-00874E BN44-00874E | Black screen and a click every 10-15 seconds. Sometimes it turns off, the TV turns back on after a few seconds. | By disconnecting the CNM802 connector from the BN94-14119C main board. The backlight lamps turn on and the intermittent click stops. Power supply failure. Check FP801S, CP809, CP810, QP801CS, QP802CS, CP811 and CP812. | Replace all | Paulão |
SAMSUNG | UN48H4200 | On start, Samsung logo appears and restarts | IC 801 replace and run for the hug | Solved IC801 replaced | Renildo |
LG | 32LG30R | Very reddish or bluish image | IC802 failure, it's a 24C64 memory, just replace or rewrite | re-record IC802 and run to the hug | Gilberto Costa |
SONY | KDL-46BX455 | Logo appears and go off. Standby LED flashes 6x | 1 screen lamp does not light up | T4 transformer replaced on inverter board V291-301 | SANTOMEL |
PHILIPS | 32PFL3518G L12M3.1L LA cod.441 | INVERTED IMAGE | MAIN PCB ADAPTATION GAVE IMG INVERTED. IN THIS ADAPTATION I USED THE PCB FROM A PHILIPS 39PFL4508G/78 (COD.445) | ENTER SERVICE MODE BY TYPING: TYPE ON THE REMOTE CONTROL: 062598+MENU+441 (code on the label on the back cover) | EVANDO VIANA |