S5400DMD ICC10 TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: S5400DMD ICC10
Results: 2

S5400DMD ICC10 Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
TELEFUNKEN S5400DMD ICC10
At switch on the led blinks 3 times, supply tries to come up with a tick-tick sound. after trying 4 times to come up it goes to error standby with led blinking very fast. error code 3Make sure primary side of power supply is ok by desoldering jumper jl26, connect pin 3 of il01 protection to pin 4 ground. bypass dp127. put 100w/230v lamp on usys. turn on the set the lamp should glow and pot pp120 should regulate it. i found cl007, cl015 and tl003 shorted
TELEFUNKEN S5400DMD ICC10
At switch on the led blinks 3 times, supply tries to come up with a tick-tick sound. after trying 4 times to come up it goes to error standby with led blinking very fast. error code 3Make sure primary side of power supply is ok by desoldering jumper jl26, connect pin 3 of il01 protection to pin 4 ground. bypass dp127. put 100w/230v lamp on usys. turn on the set the lamp should glow and pot pp120 should regulate it. i found cl007, cl015 and tl003 shorted