itt Repair Tips
Search: itt
Results 510
Results 510
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| ITT | CVC824 | Sound - Distorted & low. | C228 ( 160uf ) o/c. | ||
| ITT | CVC824 | Colour - Intermittent no colour. | C721 ( 100u f , 16v ) | ||
| ITT | CVC824 | Blank raster. | D301. | ||
| ITT | CVC823 | No raster | Pin 8 TDA3560 only 1v (5v); T400 leaky | ||
| ITT | CVC823 | Dead - Chirping after switching off. | T616/7 ( BC238B ) leaky. | ||
| ITT | CVC820 | Frame - Blowing Frame chips. | Check for broken lead out on L411. | ||
| ITT | CVC820 | Channels - Intermittent channel changing. | Change focus spark gap. | ||
| ITT | CVC803 | int dead - esp when cold | Dry joints L700 - base of LOP Tr - HT only | ||
| ITT | CVC801 CVC801 | Picture - striped. | C658 ( 200u f , 385v ) smothing pack. | ||
| ITT | CVC801 | Whistle - may be intermittent. | Linearity coil L505. | ||
| ITT | CVC801 | Uncontrollable sound full on | T1 on control panel leaky BC237S | ||
| ITT | CVC801 | Startup - intermittent start up. | Remove R774 ( 100k ) | ||
| ITT | CVC801 | Sound - no/dist sound at switch on. | C228 leaky. | ||
| ITT | CVC801 | dead with slight whistle HT only 10V (110V) | BU208 LOP Tr leaky | ||
| ITT | CVC801 | Dead - slight crackle at sw off | HT only 20v - C757 o/c | ||
| ITT | CVC801 | Dead - no 110v rail. | C757 ( 10u f ) | ||
| ITT | CVC801 | Dead - 110v & 20v rails ok. | Drys on R700 & L700 | ||
| ITT | CVC800 | Startup - will not start from cold. | R731 ( 820k ) high. | ||
| ITT | CVC800 | Startup - will not start from cold. | R744 ( 100k ) . | ||
| ITT | CVC800 | Startup - Intermittent start up. | C757 ( 10u F ) |