beko 12220 Repair Tips
Search: 12220 beko
Results 11
Results 11
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Beko | 12220T | Dead psu | C110 defective in psu 47uF, 25V - Resevoir cap for ic | ||
| Beko | 12220T | Dead 55v HT | D111 FR30-02 S/C, U4 supply diode | ||
| Beko | 12220NX | The status information appeared on the scrcen at r | The cause of the fault was on the audio panel , where the 17.47MHz crystal Q2 was drifting when warm.§ | ||
| Beko | 12220NX | Status info perm/semi perm displayed | Q2 17.47 Mhz Xtal on audio pcb drifting | ||
| Beko | 12220 10.2 | Front cont int don't work | Check momentary contacts on mains sw | ||
| Beko | 12220 | Trips off at sw on - HT = 125v on bulb | D801 BY299 s/c - LOPTX could be the cause | ||
| Beko | 12220 | Top quarter of screen lit & blank - rest black | R717 1M o/c - connected to pin 5 TEA2029 also check R722 in series 1M | ||
| Beko | 12220 | Top ¼ of screen lit, rest blanked | R717 1M o/c also check R722 1M | ||
| Beko | 12220 | Int pic/sound - disappears with flashing on screen and noise thro speaker | Xtal Q701 in front of IC701 | ||
| Beko | 12220 | Col int | Dec panel plugs int | ||
| Beko | 12220 | Blank screen with buzzing & Thy overheats | R725 hi res |