beko 28128NX Repair Tips
Search: 28128NX beko
Results 4
Results 4
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Beko | NR28128NX | No R/C - front controls ok | No activity around IC951 - chip faulty | ||
| Beko | NR28128NX | Dead & squealing | LOPTx HR8007 approx £16 | ||
| Beko | 28128NX 11.1 | Dead aft smoke | LOPTx u/s 058.541-TR1 R118 10k 0.5W in beam current sensing burnt R110 4.7R 0.5W fusible o/c in +200V supply | ||
| Beko | 28128NX | Dead & tripping psu | S/C BU508DF LOPTr - when replaced int width variations - caused by wire on Line Dr Trfmr not soldered |