sanyo CBP2146 Repair Tips
Search: CBP2146 sanyo
Results 9
Results 9
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Sanyo | CBP2146 E2-E21 | Poor sync. | IC1011 ( SAA5230 ) | ||
| Sanyo | CBP2146 E2-E21 | Picture fades shortly after switch on. | Drys R479. | ||
| Sanyo | CBP2146 E2-E21 | Lack of width & shuts down when set is warm. | C310 ( .047uf 50v ) | ||
| Sanyo | CBP2146 E2-E21 | Int red picture. | Drys A602 on CRT base. | ||
| Sanyo | CBP2146 E2-E21 | Corrupted text. | IC1031 ( SAA5240A ) | ||
| Sanyo | CBP2146 E2-E21 | Corrugated verticals. | Check EHT lead connections. | ||
| Sanyo | CBP2146 E2-E21 | Bright raster with flyback lines. | R478 ( 10k ) o/c. | ||
| Sanyo | CBP2146 | PIP became negative with overloaded col | PIP interface supply rose from 5v to 6.2v; 5v stab QC0905/3052V on edge of interface board faulty | ||
| Sanyo | CBP2146 | Negative picture on small insert. | QC0905A/3052v 5v reg. |