sanyo CBP2876 Repair Tips
Search: CBP2876 sanyo
Results 6
Results 6
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Sanyo | ED0 CBP2876A | Dead - LOPTr Q650 2SD1556 s/c | C605 2µ2 line dr coupler leaky was cause | ||
Sanyo | CBP2876-00 ED028 | Txt moves sideways - pic ok | IC400 DPU2553 & check for line pulses to the chip | ||
Sanyo | CBP2876 ED0 series | Field collapse with thin bowed line across screen | Bad joints CRT coil connector | ||
Sanyo | CBP2876 ED series | Dead - LOPTr s/c | dry joints on the Q600 a TIP111 Darlington device, C606 2.2mfd 50 volts C605 located next to TIP111 which was leaking electrolyte, T600 the line driver TX which was short circuit to all legs having cooked up and R600 10 safety resistor which feeds the line drive stage from the 28 volts rail coming from the PSU. | ||
Sanyo | CBP2876 | St/by only with squealing | fop chip TDA8170, C703 100µ, Fuselink R715 replaced & now works with hissing from LOPTx. LOPTx also replaced | ||
Sanyo | CBP2876 | Red, green & blue flyback lines | C700 100µ hi esr |