samsung CI6230WN Repair Tips
Search: CI6230WN samsung
Results 9
Results 9
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Samsung | U88MT CI6230WN | poor start up and/or no stby, LED is off | C806 100uF 25V (pin 9 TDA4601) | ||
| Samsung | U88MT CI6230WN | Int. goes on/off to stby | C831 220uF 200V | ||
| Samsung | CI6230WN | Won't come out of st/by when cold | C806 100µ 25v | ||
| Samsung | CI6230WN | Tripping | C56 2u2 250v , C590 ON TUBE PCB USE 450v TYPES | ||
| Samsung | CI6230WN | Tripping | CHECK C560 2.2mfd 250v CRT BASE , REPLACE C590 AS WELL. ( TO CONFIRM - REMOVE CRT BASE CONNECTOR AT PLUG NEAR LOPT ) | ||
| Samsung | CI6230WN | Pulsing psu & Tripping | C560 2µ2 250v on crt base - also check C590 - remove plug by loptx to crt base to check this fault | ||
| Samsung | CI6230WN | No R/C operation | Micro IC701 had developed internal s/c which made prot line go low- PCA84C840/062 | ||
| Samsung | CI6230WN | Field chip has short life | fit a 470n cap from pin 5 of the chip to deck and replace PJ28 with a 10 mH choke, check elect caps, give no guarantee and hope! | ||
| Samsung | CI6230WN | Dead with squeal | C416 2µ2 250v in LOP supply |