sharp DV51083 Repair Tips
Search: DV51083 sharp
Results 9
Results 9
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Sharp | DV51083H D3000 | Faint raster which can't be turned off by R/C or hor bars | C1485 47µ 50v, C1442 10µ 16v on dig vid panel. Also change C732 & C710 in 5v supply & C719 1000µ 6.3v in 5VM supply | ||
| Sharp | DV51083H D3000 | Dead. When the collector of the 2SD1546 line outpu | The line output transformer was faulty. Fit a replacement and power the set up slowly via a variac. If at about 100V input th | ||
| Sharp | DV51083H D3000 | Dead - HT present | C715 1000mfd 16v in 5VM supply | ||
| Sharp | DV51083H | Tripping & various faults | Fault on digital sub panel (uses the ITT Digit 2000 chipset) & is very unreliable - as each chip costs £20+ & entire panel replacement is advised by Sharp (£200) - repair is usually uneconomic | ||
| Sharp | DV51083 D3000 | Trips after LOPTx replacement | FOP chip TDA8175 s/c & supply res 1R o/c | ||
| Sharp | DV51083 D3000 | Tripping continously - int originally | C715 2200 16v LT res cap low cap | ||
| Sharp | DV51083 D3000 | Dead - HT ok when LOP dis'd | LOPTx faulty | ||
| Sharp | DV51083 | Weak R when heated | Set up grey scale via hset | ||
| Sharp | DV51083 | Dead | C710 1000µ 25v, C734 100µ 25v hi esr |