sharp DV5132H Repair Tips
Search: DV5132H sharp
Results 8
Results 8
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Sharp | DV5132H Deco 5 | Trips at sw on | R612 3R3 safety res o/c | ||
Sharp | DV5132H Deco 5 | Lack of height | IC1400 RH-IX1426BMNO on digital pcb | ||
Sharp | DV5132H Deco 5 | Dead - R705 3k3 fusible o/c | Check 725 39R for hi res | ||
Sharp | DV5132H Deco 5 | Bright raster then shuts down at sw on | No 200v to crt pcb - C857 100pF leaky & R632 o/c | ||
Sharp | DV5132H | IN PROTECTION MODE THEN SBY | CHECK R612 FUSIBLE SUPPLY TO FIELD IC | ||
Sharp | DV5132H | Dead with led flashing red/green | R751 0R33 safety res had doubled res value | ||
Sharp | DV5132H | Dead with LED flashing between red & green | A common problem is due to R751 & R777 (both 0.33R) increasing in value by only a small amount. Best to substitute them rather than relying on meter checks. Sharp also advise replacing D751,D700,C756 and/or R612 at the same time. | ||
Sharp | DV5132H | Dead - blows chopper tr at sw on | Chopper tfmr s/c turns pins 2 & 7 |