sharp DV5150 Repair Tips
Search: DV5150 sharp
Results 7
Results 7
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Sharp | DV5150H | Reverts to st/by aft 2 secs | No 24v supply to FOP chip as R612 3R3 safety res o/c - Sharp mod - fit 2R2 safety res & link J13 replaced by 1R2 ½w res | ||
| Sharp | DV5150H | Int goes off with crackle | Dry joints C603 6n8 1.5kv | ||
| Sharp | DV5150G | Dead led flashes red | Check R612, 621 & C714 1000µ? 16v | ||
| Sharp | DV5150G | Dead | R728 3k3 safety res overheating, chopper tfmr shorted turns (draws 500mA off load -should be only 120mA) | ||
| Sharp | DV5150 S3B | Field top stretched | C712 100µ 35v in 24v supply | ||
| Sharp | DV5150 | COMES ON BUT GOES STRAIGHT TO STBY | R612 OC CHANGE TO 2R2 REPLACE WIRE LINK J13 WITH 1R2 RESISTOR Pt No s -XZ0204BMZZ VRD-RA2HD1R2J | ||
| Sharp | DV5131H DV5150 | NO CHROMA AFTER CHAN. CHANGE OR SLOW TO LOCK AFTER | ADD 8.2M RES. BETWEEN PINS 25 - 39 OF IC801 |