sharp DV5932H Repair Tips
Search: DV5932H sharp
Results 8
Results 8
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Sharp | DV5932H DV5935 | Stuck in standby. | CRACKED PRINT AROUND LOPT T600 | ||
Sharp | DV5932H BCTV-A | E-W dist | L604 E/W coil burnt & C607 0ยต56 250v | ||
Sharp | DV5932H | Dead - line stage burn up | Replace C619 56nfd 250v cap R632 39ohm safety resister (o/c ) Line output transister 2SD1546 (leaky). | ||
Sharp | BCTVA DV5932H | pic moved to top, E-W distortion | L604 shorted turns (RCILP0104CEZZ) | ||
Sharp | BCTVA DV5932H | Ok from cold, then pic starts to flash | IC500 TDA830Q | ||
Sharp | BCTVA DV5932H | E-W error | replace frame IC and 36V zener (s/c) | ||
Sharp | BCTVA DV5932H | dead or tripping | TDA8350Q s/c, C627 1nF 2kV leaky | ||
Sharp | BCTVA DV5932H | at switch on reverts back to stby | C725 220uF10V, C729 470uF 16V |