GDM2036S Repair Tips
Search: GDM2036S
Results 8
Results 8
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Sony | GDM2036S | SHUTDOWN DUE TO Q204/H. OUT FAILURE ON D3 PCB | The monitor shut down due to Horiz. scan failure. The H.Out: Q204 and B+/H. Size Reg.: Q217 failed. B+ Filter C405 had lowcapacitance. | ||
| Sony | GDM2036S | PICTURE IS UNSTABLE WHEN CHANGING FROM TEXT TO GRAPHICS MODE | |||
| Sony | GDM2036S | NO HIGH VOLTAGE, AND NO HSYNC DUE TO IC101 (H OSC) | All Power Supply Voltages are OK but, No Horizontal drivesignal from IC101. | ||
| Sony | GDM2036S | RECOMMENDED SCREEN CLEANER | |||
| Sony | GDM2036S | RECOMMENDED SCREEN CLEANER/USE (3-731-449-01) DRY SOFT CLOTH | This monitor has an anti-glare coating on the CRT. What typeof cleaner is recommended? -HQ COMMENTS: All GDM Monitors unlike CPD Monitors have a coating on thescreen surface. We recommend a dry soft cloth (P/N:3-731-449-01) to cleanthe screen surface. | ||
| Sony | GDM2036S | PICTURE STRETCHES VERTICALLY DUE TO IC-201 | After warm up, the picture will start to stretch vertically atthe bottom. Customers says it would take anywhere from 1/2 to 2 hours.By heating and cooling IC-201 I was able to produce the problem. | ||
| Sony | GDM2036S | NO OPERATION, SCREACHING SOUND FROM THE POWER SUPPLY. | |||
| Sony | GDM2036S | NO VERTICAL DEFLECTION | Unit has no vertical deflection. Checked and found openvertical Yoke. Tried to locate the open, and found C01 on the Yoke ass'yopen. The coil is made up of large wire, so it cannot be defective. |