M2000 Repair Tips
Search: M2000
Results 11
Results 11
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Fidelity | CTM2000T | Tripping | 10nf lop tuning cap burn up & BU508A lop tr leaky | ||
Fidelity | CTM2000R | Loss of sync when heated | C100 33ยต 250v HT res cap (HT still measured ok at 119v) | ||
Sony | TAM2000 | NO FUNCTIONS - REPLACE IC1, P/N 8-759-276-39 | No functions, although power light turns on, unit overheats.Won't go beyond initial test mode. | ||
Sony | TAM2000 | WON'T RECEIVE CALLS/CANNOT PROGRAM ANY FUNCTIONS | Won't receive calls/cannot program any functions. | ||
Sony | TAM2000 | LOUD BUZZ WHEN PLAYING BACK OGM OR MEMO - CLEAN S401. | UNIT WOULD PLAYBACK OGM OR MEMOS WITH LOUD BUZZ ON TOP OFAUDIO BUT ONLY WHEN MESSAGE/MEMO WAS RECORDED WITH S401 IN THE ANNOUNCEONLY POSITION. RECORDINGS MADE WITH S401 IN OTHER 2 POSITIONS WOULDPLAYBACK NORMALLY AS WOULD ANY ICM. | ||
Sony | TAM2000 | ANY PHONE HOOKED UP TO MACHINE IS DEAD - REPLACE Q301 | Unit would not power up and also was shorting line (dialtone), making any phone hooked to unit appear dead. This occurred evenwith TAM2000 unplugged from AC adapter. | ||
Sony | M2000 | TAPE SPEED VARIES | Pinch roller will not contact capstan. Tape speed varies.The shaft that connects with spring 59 is bent or part of the pinch rollerassy is bent. | ||
Sony | GVM2000 | RECOMMENDED SCREEN CLEANER/USE (3-731-449-01) DRY SOFT CLOTH | |||
Sony | M2000 | AUTO BACKSPACE DOES NOT WORK | Auto backspace does not engage. A shifting lever in themechanism which shifts gears reference numbers 80, 82 -performs functionsof fast forward and fast rewind. It does not shift smoothly and quicklybut the functions of fast forward and fast rewind do | ||
Sony | GVM2000 | SUPPORT BRACKET PART NUMBER (A BOARD) | Support bracket for the A board on the GVM-2000 is needed.No part number is listed for this item in the service manual. -HQ COMMENTS: The part number for this item is 4-393-914-02. Pleaseupdate your service manual. | ||
Sony | GVM2000 | NINE-PIN ADAPTOR | Nine-pin D-type adaptor that comes with the unit is notidentified with a part number in the service manual. |