philips NC3CR Repair Tips
Search: NC3CR philips
Results 5
Results 5
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Philips | NC3CR | Will not come out of standby - after new sw. | Low s/by contacts remain connected as long as mains do. | ||
Philips | NC3CR | No sound or picture after half hour. | CNX62 optocoupler. | ||
Philips | NC3CR | Motorboating - green raster. | C2483 dry if so it may have damaged 78M05 5v reg. | ||
Philips | NC3CR | Distorted sound | R416 6.8R in 22v supply | ||
Philips | NC3CR | Dead - went bang - print blown off PCB. | Drys on mains on/off switch. |