HITACHI NP9A Repair Tips
Search: NP9A HITACHI
Results 7
Results 7
| Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
|---|---|---|---|---|---|
| Hitachi | NP9A | Width - reduced. | R756 o/c. | ||
| Hitachi | NP9A | Tripping. | Q905 ( 2SA673 ) o/c. | ||
| Hitachi | NP9A | Standby - stuck in standby mode. | Change C919 to 220u F , replace C906/918 , drys on T901/703 | ||
| Hitachi | NP9A | Standby - going into standby int. | 4.43Mhz crystal X1401. on memory PCB PC895. | ||
| Hitachi | NP9A | Standby - going into standby at switch on. | Check C919 if its a 22u f change it to a 220u f. | ||
| Hitachi | NP9A | Line - pulling on verticals. | CRT conductive earthing , C983 , C907 , IC980. | ||
| Hitachi | NP9A | Dead - Int dead. | DJs |