GRUNDIG TV Repair: Common Faults and Solutions.
Search: GRUNDIG
Results: 948
Results: 948
GRUNDIG Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| GRUNDIG | XENTIA 42LXW | Does not tune through bdo tuner | Replace tuner or 4mhz crystal inside it | jose almeida tavares | |
| GRUNDIG | ST-72-760/8TOP CUC5365 | Alloy does not start, r576 with high temperature | Transformer mat29201.029.10 (hr6514) | JOAQIM CUNHA | |
| GRUNDIG | T55-549 CUC5302 | Does not go out of standby, it immediately goes into protection | (t583)bc548 with leak | TELEGAIA | |
| GRUNDIG | CUC3400 | Return lines and excess shine | Verificar zener d707 (4,7v), c711, c731 | ||
| GRUNDIG | CUC3400 | Inop. 800ma fuse blows | Check c667(2u2), c653(4n7), d663, d664 | ||
| GRUNDIG | T55-743 EURO CUC6300 | Interference in the image | Check internal welds of tuner | ||
| GRUNDIG | G1000 G1000 | There is no image dark screen with sidebar | Tr300 (bc847) leaking | ||
| GRUNDIG | CUC7303 | Flashing LED does not start | C667 | ||
| GRUNDIG | GDP-3100-3200-5100 | Power supply does not start | In the empty space of r204 add a resistance of 27r/2w; if necessary adjust RV201 up to 3.4v | ||
| GRUNDIG | P37-060 CHASSIS CUC6300 | Doesn't work, only front LED lights up | Submit | ||
| GRUNDIG | P37-060 CHASSIS CUC6300 | Does not adjust contrast | Refute1 | ||
| GRUNDIG | MW70-100/8 CHASSIS CUC1828 | No east/west correction | D55012 shorted | ||
| GRUNDIG | T63-640A TEXT CUC6310 | Tda8145 with excessive heating and the rv's, e/w adjustment r462, 460 and 431 do not work. | L569 with shorted turns due to excessive heating caused by a previous fault on that line. l569 using new wire. | ||
| GRUNDIG | T63-640A TEXT | Image very cropped on the sides and half-moon. | C567 (360nf) totally disabled. | ||
| GRUNDIG | |||||
| GRUNDIG | T51-731 TEXT CUC7303 | Does not receive signal from remote c. | Infrared receiver ic. broken | ||
| GRUNDIG | MFW82-3101 CHASSI CUC2068 | Does not capture image via rf and the screen darkens and notice if the contours of the scene are sometimes | Tea6415c | ||
| GRUNDIG | CUC2030 | Change in tune | Ct81080 - bc846b | ||
| GRUNDIG | P37-040A, CH CUC5303 | TV has sound but no image | Solder the coiled 15r resistance r576 that is desoldered next to the line transformer | ||
| GRUNDIG | P37-050 - CUC 5303 | Turns on, has normal image and sound. Works for 10, 15 minutes and turns off. | Replace the infrared receiver. |