GRUNDIG TV Repair: Common Faults and Solutions.
Search: GRUNDIG
Results: 948
Results: 948
GRUNDIG Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
GRUNDIG | 2401 | Tripping | Check l-o-trans & l519 | ||
GRUNDIG | 2275 | Line wobble , worse when cold | C2731 ( 100uf , 63v ) on deflection panel | ||
GRUNDIG | 1510 | Dead - intermittent. | Crack in print. | ||
GRUNDIG | 717 | No raster - distorted sound. | Dl701/703 c708/709. | ||
GRUNDIG | 80 | Smeary picture - intermittently. | Luma delay line leaky. | ||
GRUNDIG | CUC4400 CUC4400 | Poor or distorted image | Tda5931 ic2210 | ||
GRUNDIG | CUC4400 CUC4400 | No sound, black screen | Subst. t2213 and t2221 no IF board. | ||
GRUNDIG | CUC4400 CUC4400 | Does not turn off at the main switch | Verify contacts | ||
GRUNDIG | CUC4400 CUC4400 | Flickering/lines with pic breakup | C2257 100n 63v in line osc | ||
GRUNDIG | CUC4400 CUC4400 | Poor synchronization | C2257 100nf 63v | ||
GRUNDIG | CUC4400 CUC4400 | Channels and sound volume changes alone | Ir detector tfms3300 | ||
GRUNDIG | T55-4201 Beko 12.6 | Does not show osd | C410 unsoldered or broken on one side | Sub c410 =1n | |
GRUNDIG | P37 4501 E 1 Z50.190-08 | When turned on, the LED flashes 3 times at an interval of 5 seconds | Protection + a has 130 volts normal at st by 122v0ltes | R = 619 = 15 k replaced | |
GRUNDIG | P37 4501 E1 | LED flashes 4 times with an interval of 7 seconds | Protection | High screen | |
GRUNDIG | MF 55-2502 K1 = kx1,190.60 | Image with colored contours | Area | Ctr c 713 board = 4700' 1kv | |
GRUNDIG | T55-645 G1000 | Ats simultaneously press volume - and volume + and turn on the main switch | Mode service p- and p+ 5 seconds | ||
GRUNDIG | S170-755 CUC 6360/6365 | Senario with lots of light even at minimum | Mod 2950416567 | Replace c15060=bc858 | |
GRUNDIG | CUC6300 | Big image | R572 = 10k interrupted | Sub r 572 = 10k | |
GRUNDIG | ST 70-755 CUC 6360/6365 | Scene with lots of light even at the minimum | Mod 29504 165 67 | Sub ct5060 = bc858 | |
GRUNDIG | T55-4201 Beko 12.6 | LED does not turn on | Difficulty calling | Add capacitor in position c633 = 10n |