Gradiente TV Repair: Common Faults and Solutions.
Search: Gradiente
Results: 1318
Results: 1318
Gradiente Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
GRADIENTE | GT-2020 | In black and white | Resolder in the line of palm-m and NTSC crystal capacitors | ||
GRADIENTE | D-201 | Does not read DVDs and CDs | Check flat cable fitting | ||
GRADIENTE | AT70 | Dead | Check, ta8122, c152(fm) , c106, c115 | ||
GRADIENTE | GT-2033 | Gets dark after a while | D405 c/fuga | ||
GRADIENTE | GT-2011 | Without power | Cp86 | ||
GRADIENTE | TF-2952 | Turns off by itself | D404, dz401, c426 | ||
GRADIENTE | TV-2922 | Turns off after a few minutes | C805 | ||
GRADIENTE | GT-2010 | Doesn't start | Cp06 - rp31 | ||
GRADIENTE | TV--2922 GBT--2911 | Distorts the image in bright scenes and on some cable TV channels | Change micronas to version f1 and perform the software update, consulting technical bulletin no. 449 to select the correct file for update | ||
GRADIENTE | TV--2922 GBT--2911 | Turning off by itself | Software, if the problem persists, switch to f1 | ||
GRADIENTE | TV--2922 GBT--2911 | Turning off by itself | Fly back triggering protection | ||
GRADIENTE | TV--2922 GBT--2911 | Turning off by itself | D404 and zd401 shorted | ||
GRADIENTE | TV--2922 GBT--2911 | Turning off by itself | C805, replace with 250v capacitor | ||
GRADIENTE | TV--2922 GBT--2911 | Doesn't start | Microphones without recording or with incorrect software | ||
GRADIENTE | TV--2922 GBT--2911 | Cuts the sound after a few seconds | Change the iic2 ((eprom)) and subsequently, the software update.. | ||
GRADIENTE | TV--2922 GBT--2911 | Cuts the sound and returns after turning it off | Requires software update | ||
GRADIENTE | GT-1422 | Green screen | Check vr703 | ||
GRADIENTE | TV-2922 | Turns off when tuning | Check c42 on the agc line | ||
GRADIENTE | D461 | Doesn't work. display off | C908, 47uf/25v | ||
GRADIENTE | TF-2140 | Sometimes it doesn't turn on and the LED blinks | Check welds on the r936 line |