Gradiente TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: Gradiente
Results: 1318

Gradiente Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
GRADIENTEGT-1422-1420-2020-2022
The TV has a very low whistle like... pit-pit-pit, normal power supplyC823, also check c821
GRADIENTEGBT-2011
No image and osdClean eeprom or replace it with a new one turn on the TV wait a few seconds until it loads initial data
GRADIENTENEXT 29
Image closed horizontallyIc302 e r316
GRADIENTEGT-1411
Does not turn on, LED blinks and goes outCheck chopper terminals
GRADIENTEGBT-2911
Does not work with whistleDisconnect d401 from 180v, if it works with faulty rgb ic retraction, sometimes it damages the micro.
GRADIENTETV-2020
Turns off intermittentlyCheck welds at the power supply
GRADIENTEGT-2020
In black and whiteResolder in the line of palm-m and NTSC crystal capacitors
GRADIENTED-201
Does not read DVDs and CDsCheck flat cable fitting
GRADIENTEAT70
DeadCheck, ta8122, c152(fm) , c106, c115
GRADIENTEGT-2033
Gets dark after a whileD405 c/fuga
GRADIENTEGT-2011
Without powerCp86
GRADIENTETF-2952
Turns off by itselfD404, dz401, c426
GRADIENTETV-2922
Turns off after a few minutesC805
GRADIENTEGT-2010
Doesn't startCp06 - rp31
GRADIENTETV--2922 GBT--2911
Distorts the image in bright scenes and on some cable TV channelsChange micronas to version f1 and perform the software update, consulting technical bulletin no. 449 to select the correct file for update
GRADIENTETV--2922 GBT--2911
Turning off by itselfSoftware, if the problem persists, switch to f1
GRADIENTETV--2922 GBT--2911
Turning off by itselfFly back triggering protection
GRADIENTETV--2922 GBT--2911
Turning off by itselfD404 and zd401 shorted
GRADIENTETV--2922 GBT--2911
Turning off by itselfC805, replace with 250v capacitor
GRADIENTETV--2922 GBT--2911
Doesn't startMicrophones without recording or with incorrect software